元器件交易网www.cecb2b.comTLV1117ADJUSTABLE AND FIXED LOWĆDROPOUT VOLTAGE REGULATORSSLVS561A − DECEMBER 2004 – REVISED MARCH 2005D1.5 V, 1.8 V, 2.5 V, 3.3 V, 5 V, and AdjustableDDOutput Voltage OptionsOutput Current of 800 mAOperates Down to 1.1-V DropoutDCY (SOT-223) PACKAGE(TOP VIEW)DSpecified Dropout Voltage at MultipleDDCurrent Levels0.2% Line Regulation Maximum0.4% Load Regulation Maximum DRJ (QFN) PACKAGE(TOP VIEW)KCS (TO-220) PACKAGE(TOP VIEW)INPUTOUTPUTOUTPUTADJ/GNDOUTPUTADJVIN†VIN†VIN†12348NCVOUT‡VOUT‡VOUT‡INPUTOUTPUTADJ/GNDVOUT765†VIN pins (2, 3, 4) must be connected together.‡VOUT pins (5, 6, 7) must be connected together.KTE (PowerFLEXE) PACKAGE(TOP VIEW)KTP (PowerFLEXE/TO-252) PACKAGE(TOP VIEW)KTT (TO-263) PACKAGE(TOP VIEW)OUTPUTOUTPUTOUTPUTINOUTADJ/GNDINPUTOUTPUTADJ/GNDINPUTOUTPUTADJ/GNDdescription/ordering informationThe TLV1117 is a positive low-dropout voltage regulator, designed to provide up to 800 mA of output current.The device is available in 1.5 V, 1.8 V, 2.5 V, 3.3 V, 5 V, and adjustable output voltage options. All internal circuitryis designed to operate down to 1-V input-to-output differential. Dropout voltage is specified at a maximum of1.3 V at 800 mA, decreasing at lower load currents.The low-profile surface-mount KTP package allows the device to be used in applications where space is limited.The TLV1117 requires a minimum of 10 mF of output capacitance for stability. Output capacitors of this size orlarger normally are included in most regulator designs.Unlike pnp-type regulators, where up to 10% of the output current is wasted as quiescent current, the quiescentcurrent of the TLV1117 flows into the load, increasing efficiency.The TLV1117C device is characterized for operation over the virtual junction temperature range of 0°C to 125°C,and the TLV1117I device is characterized for operation over the virtual junction temperature range of −40°C to125°C.Please be aware that an important notice concerning availability, standard warranty, and use in critical applications ofTexasInstruments semiconductor products and disclaimers thereto appears at the end of this data sheet.PowerFLEX is a trademark of Texas Instruments.PRODUCTION DATA information is current as of publication date.Products conform to specifications per the terms of Texas Instrumentsstandard warranty. Production processing does not necessarily includetesting of all parameters.Copyright 2005, Texas Instruments IncorporatedPOST OFFICE BOX 655303 DALLAS, TEXAS 75265•1元器件交易网www.cecb2b.comSLVS561A − DECEMBER 2004 – REVISED MARCH 2005TLV1117ADJUSTABLE AND FIXED LOWĆDROPOUT VOLTAGE REGULATORSdescription/ordering information (continued)TLV1117C ORDERING INFORMATIONTJVO TYP(V)QFN (DRJ)1.5 VSOT-223 (DCY)TO-263 (KTT)QFN (DRJ)1.8 VSOT-223 (DCY)TO-263 (KTT)QFN (DRJ)2.5 VSOT-223 (DCY)TO-263 (KTT)QFN (DRJ)0°C to 125°C3.3 VSOT-223 (DCY)TO-263 (KTT)QFN (DRJ)5 VSOT-223 (DCY)TO-263 (KTT)PowerFLEX (KTE)PowerFLEX/TO-252‡ (KTP)QFN (DRJ)ADJSOT-223 (DCY)TO-220 (KCS)TO-263 (KTT)PACKAGE†Reel of 1000Reel of 2500Reel of 2000Reel of 1000Reel of 2500Reel of 2000Reel of 1000Reel of 2500Reel of 2000Reel of 1000Reel of 2500Reel of 2000Reel of 1000Reel of 2500Reel of 2000Reel of 2000Reel of 2000Reel of 1000Tube of 80Reel of 2500Tube of 50Reel of 2000ORDERABLEPART NUMBERTLV1117-15CDRJRTLV1117-15CDCYRTLV1117-15CKTTRTLV1117-18CDRJRTLV1117-18CDCYRTLV1117-18CKTTRTLV1117-25CDRJRTLV1117-25CDCYRTLV1117-25CKTTRTLV1117-33CDRJRTLV1117-33CDCYRTLV1117-33CKTTRTLV1117-50CDRJRTLV1117-50CDCYRTLV1117-50CKTTRTLV1117CKTERTLV1117CKTPRTLV1117CDRJRTLV1117CDCYTLV1117CDCYRTLV1117CKCSTLV1117CKTTRTOP-SIDEMARKINGPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWTLV1117CTV1117PREVIEWV4TLV1117CPREVIEW†Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available atwww.ti.com/sc/package.‡Complies with TO-252, variation AC.2POST OFFICE BOX 655303 DALLAS, TEXAS 75265•元器件交易网www.cecb2b.comTLV1117ADJUSTABLE AND FIXED LOWĆDROPOUT VOLTAGE REGULATORSSLVS561A − DECEMBER 2004 – REVISED MARCH 2005TLV1117I ORDERING INFORMATIONTJVO TYP(V)QFN (DRJ)1.5 VSOT-223 (DCY)TO-263 (KTT)QFN (DRJ)1.8 VSOT-223 (DCY)TO-263 (KTT)QFN (DRJ)2.5 VSOT-223 (DCY)TO-263 (KTT)QFN (DRJ)−40°C to 125°C3.3 VSOT-223 (DCY)TO-263 (KTT)QFN (DRJ)5 VSOT-223 (DCY)TO-263 (KTT)PowerFLEX (KTE)PowerFLEX/TO-252‡ (KTP)QFN (DRJ)ADJSOT-223 (DCY)TO-220 (KCS)TO-263 (KTT)PACKAGE†Reel of 1000Reel of 2500Reel of 2000Reel of 1000Reel of 2500Reel of 2000Reel of 1000Reel of 2500Reel of 2000Reel of 1000Reel of 2500Reel of 2000Reel of 1000Reel of 2500Reel of 2000Reel of 2000Reel of 2000Reel of 1000Tube of 80Reel of 2500Tube of 50Reel of 2000ORDERABLEPART NUMBERTLV1117-15IDRJRTLV1117-15IDCYRTLV1117-15IKTTRTLV1117-18IDRJRTLV1117-18IDCYRTLV1117-18IKTTRTLV1117-25IDRJRTLV1117-25IDCYRTLV1117-25IKTTRTLV1117-33IDRJRTLV1117-33IDCYRTLV1117-33IKTTRTLV1117-50DRJRTLV1117-50IDCYRTLV1117-50IKTTRTLV1117IKTERTLV1117IKTPRTLV1117IDRJRTLV1117IDCYTLV1117IDCYRTLV1117IKCSTLV1117IKTTRTOP-SIDEMARKINGPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWTLV1117ITY1117PREVIEWV2TLV1117IPREVIEW†Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available atwww.ti.com/sc/package.‡Complies with TO-252, variation AC.POST OFFICE BOX 655303 DALLAS, TEXAS 75265•3元器件交易网www.cecb2b.comSLVS561A − DECEMBER 2004 – REVISED MARCH 2005TLV1117ADJUSTABLE AND FIXED LOWĆDROPOUT VOLTAGE REGULATORSfunctional block diagramVINThermalLimit_+CurrentLimit+_VOUTGND/ADJ (Fixed-Voltage Version)GND/ADJ (Adjustable Version)absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†Continuous input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 VOperating virtual junction temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°CStorage temperature range, Tstg −65. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . °C to 150°C†Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, andfunctional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is notimplied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.4POST OFFICE BOX 655303 DALLAS, TEXAS 75265•元器件交易网www.cecb2b.comTLV1117ADJUSTABLE AND FIXED LOWĆDROPOUT VOLTAGE REGULATORSSLVS561A − DECEMBER 2004 – REVISED MARCH 2005package thermal data (see Note 1)PACKAGEPowerFLEX (KTE)PowerFLEX/TO-252 (KTP)QFN (DRJ)SOT (DCY)TO-263 (KTT)TO-220 (KCS)BOARDHigh K, JESD 51-5High K, JESD 51-5High K, JESD 51-5High K, JESD 51-7High K, JESD 51-5High K, JESD 51-5TBD3°C/WqJP†2.7°C/W3°C/WTBD4°C/WqJCqJA23°C/W28°C/WTBD53°C/WTBD19°C/W†For packages with exposed thermal pads, such as QFN, PowerPAD, and PowerFLEX, θJP is defined as the thermal resistance between the diejunction and the bottom of the exposed pad.NOTE 1:Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambienttemperature is PD = (TJ(max) − TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.recommended operating conditionsMIN†TLV1117TLV1117-15VINInput voltageTLV1117-18TLV1117-25TLV1117-33TLV1117-50IOUTTJOutput currentOperating virtual junction temperature rangeTLV1117CTLV1117I0−402.72.93.23.94.76.4MAX1515151515150.8125125A°CVUNIT†The input-to-output differential across the regulator should provide for some margin against regulator operation at the maximum dropout (for aparticular current value). This margin is needed to account for tolerances in both the input voltage (lower limit) and the output voltage (upper limit).The absolute minimum VIN for a desired maximum output current can be calculated by the following:VIN(min) = VOUT(max) + VDO(max @ rated current)POST OFFICE BOX 655303 DALLAS, TEXAS 75265•5元器件交易网www.cecb2b.comSLVS561A − DECEMBER 2004 – REVISED MARCH 2005TLV1117ADJUSTABLE AND FIXED LOWĆDROPOUT VOLTAGE REGULATORSTLV1117C electrical characteristics, TJ = 0°C to 125°C, all typical values are at TJ = 25°C (unlessotherwise noted)PARAMETERTEST CONDITIONS†VIN − VOUT = 2 V, IOUT = 10 mA, TJ = 25°CIOUT = 10 mA to 800 mA, VIN − VOUT= 1.4 V to 10 VVIN = 3.5 V, IOUT = 10 mA, TJ = 25°CVIN = 2.9 V to 10 V, IOUT = 0 to 800 mAVIN = 3.8 V, IOUT = 10 mA, TJ = 25°CVIN = 3.2 V to 10 V, IOUT = 0 to 800 mAVIN = 4.5 V, IOUT = 10 mA, TJ = 25°CVIN = 3.9 V to 10 V, IOUT = 0 to 800 mAVIN = 5 V, IOUT = 10 mA, TJ = 25°CVIN = 4.75 V to 10 V, IOUT = 0 to 800 mAVIN = 7 V, IOUT = 10 mA, TJ = 25°CVIN = 6.5 V to 12 V, IOUT = 0 to 800 mAIOUT = 10 mA, VIN − VOUT= 1.5 V to 13.75 VIOUT = 0 mA, VIN = 2.9 V to 10 VLine regulationIOUT = 0 mA, VIN = 3.2 V to 10 VIOUT = 0 mA, VIN= 3.9 V to 10 VIOUT = 0 mA, VIN = 4.75 V to 15 VIOUT = 0 mA, VIN = 6.5 V to 15 VIOUT = 10 mA to 800 mA, VIN − VOUT = 3 VIOUT = 0 to 800 mA, VIN = 2.9 VLoad regulationIOUT = 0 to 800 mA, VIN = 3.2 VIOUT = 0 to 800 mA, VIN =3.9 VIOUT = 0 to 800 mA, VIN =4.75 VIOUT = 0 to 800 mA, VIN =6.5 VDropout voltage, VDO(see Note 2)Current limitMinimum load currentQuiescent currentThermal regulationIOUT = 100 mAIOUT = 500 mAIOUT = 800 mAVIN − VOUT = 5 V, TJ = 25°C‡VIN = 15 VVIN ≤ 15 V30 ms pulse, TA = 25°CVIN − VOUT = 3 V, Vripple = 1 Vpp, f = 120 HzTLV1117Allfixed-voltageoptions0.8TLV1117TLV1117-15TLV1117-18TLV1117-25TLV1117-33TLV1117-50TLV1117TLV1117-15TLV1117-18TLV1117-25TLV1117-33TLV1117-50TLV1117TLV1117-15TLV1117-18TLV1117-25TLV1117-33TLV1117-50MIN1.2381.2251.4851.471.7821.7642.4752.453.2673.2354.954.9TYP1.251.251.51.51.81.82.52.53.33.3550.035111110.2111111.11.151.21.21.750.01MAX1.2621.271.5151.531.8181.8362.5252.553.3333.3655.055.10.26666100.410101010151.21.251.31.55100.1AmAmA%/WVmV%mV%VUNITOutput voltage, VOUTRipple rejection6078dB†All characteristics are measured with a 10-µF capacitor across the input and a 10-µF capacitor across the output. Pulse testing techniques areused to maintain the junction temperature as close to the ambient temperature as possible.‡Current limit test specified under recommended operating conditionsNOTE 2:Dropout is defined as the VIN to VOUT differential at which VOUT drops 100 mV below the value of VOUT, measured atVIN = VOUT(nom) + 1.5 V.6POST OFFICE BOX 655303 DALLAS, TEXAS 75265•元器件交易网www.cecb2b.comTLV1117ADJUSTABLE AND FIXED LOWĆDROPOUT VOLTAGE REGULATORSSLVS561A − DECEMBER 2004 – REVISED MARCH 2005TLV1117C electrical characteristics, TJ = 0°C to 125°C, all typical values are at TJ = 25°C (unlessotherwise noted) (continued)PARAMETERADJUSTMENT pin currentChange in ADJUSTMENT pin currentTemperature stabilityLong-term stabilityIOUT = 10 mA to 800 mA, VIN − VOUT = 1.4 V to 10 VTJ = full range1000 hrs, No load, TA = 125°Cf = 10 Hz to 100 kHzTEST CONDITIONS†MINTYP800.20.50.3MAX1205UNITµAµA%%Output noise voltage (% of VOUT)0.003%†All characteristics are measured with a 10-µF capacitor across the input and a 10-µF capacitor across the output. Pulse testing techniques areused to maintain the junction temperature as close to the ambient temperature as possible.POST OFFICE BOX 655303 DALLAS, TEXAS 75265•7元器件交易网www.cecb2b.comSLVS561A − DECEMBER 2004 – REVISED MARCH 2005TLV1117ADJUSTABLE AND FIXED LOWĆDROPOUT VOLTAGE REGULATORSTLV1117I electrical characteristics, TJ = -40°C to 125°C, all typical values are at TJ = 25°C (unlessotherwise noted)PARAMETERTEST CONDITIONS†VIN − VOUT = 2 V, IOUT = 10 mA, TJ = 25°CTLV1117IOUT = 10 mA to 800 mA, VIN − VOUT= 1.4 V to 10 VVIN = 3.5 V, IOUT = 10 mA, TJ = 25°CVIN = 2.9 V to 10 V, IOUT = 0 to 800 mAVIN = 3.8 V, IOUT = 10 mA, TJ = 25°CVIN = 3.2 V to 10 V, IOUT = 0 to 800 mAVIN = 4.5 V, IOUT = 10 mA, TJ = 25°CVIN = 3.9 V to 10 V, IOUT = 0 to 800 mAVIN = 5 V, IOUT = 10 mA, TJ = 25°CVIN = 4.75 V to 10 V, IOUT = 0 to 800 mAVIN = 7 V, IOUT = 10 mA, TJ = 25°CVIN = 6.5 V to 12 V, IOUT = 0 to 800 mAIOUT = 10 mA, VIN − VOUT = 1.5 V to 13.75 VIOUT = 0 mA, VIN = 2.9 V to 10 VLine regulationIOUT = 0 mA, VIN = 3.2 V to 10 VIOUT = 0 mA, VIN = 3.9 V to 10 VIOUT = 0 mA, VIN = 4.75 V to 15 VIOUT = 0 mA, VIN = 6.5 V to 15 VIOUT = 10 mA to 800 mA, VIN − VOUT = 3 VIOUT = 0 to 800 mA, VIN = 2.9 VLoad regulationIOUT = 0 to 800 mA, VIN = 3.2 VIOUT = 0 to 800 mA, VIN =3.9 VIOUT = 0 to 800 mA, VIN =4.75 VIOUT = 0 to 800 mA, VIN =6.5 VDropout voltage, VDO(see Note 2)Current limitMinimum load currentQuiescent currentThermal regulationIOUT = 100 mAIOUT = 500 mAIOUT = 800 mAVIN − VOUT = 5 V, TJ = 25°C‡VIN = 15 VVIN ≤ 15 V30-ms pulse, TA = 25°CVIN − VOUT = 3 V, Vripple = 1 Vpp, f = 120 HzTLV1117All fixed-voltageoptions0.8TLV1117-15TLV1117-18TLV1117-25TLV1117-33TLV1117-50TLV1117TLV1117-15TLV1117-18TLV1117-25TLV1117-33TLV1117-50TLV1117TLV1117-15TLV1117-18TLV1117-25TLV1117-33TLV1117-50MIN1.2381.21.4851.441.7821.7282.4752.43.2673.1684.954.8TYP1.251.251.51.51.81.82.52.53.33.3550.035111110.2111111.11.151.21.21.750.01MAX1.2621.291.5151.561.8181.8722.5252.63.3333.4325.055.20.34.55.57.510150.57.5912.515201.31.351.41.55150.1AmAmA%/WVmV%mV%VUNITOutput voltage, VOUTRipple rejection6075dB†All characteristics are measured with a 10-µF capacitor across the input and a 10-µF capacitor across the output. Pulse testing techniques areused to maintain the junction temperature as close to the ambient temperature as possible.‡Current limit test specified under recommended operating conditionsNOTE 2:Dropout is defined as the VIN to VOUT differential at which VOUT drops 100 mV below the value of VOUT, measured at VIN = VOUT(nom) + 1.5 V.8POST OFFICE BOX 655303 DALLAS, TEXAS 75265•元器件交易网www.cecb2b.comTLV1117ADJUSTABLE AND FIXED LOWĆDROPOUT VOLTAGE REGULATORSSLVS561A − DECEMBER 2004 – REVISED MARCH 2005TLV1117I electrical characteristics, TJ = 40°C to 125°C, all typical values are at TJ = 25°C (unlessotherwise noted) (continued)PARAMETERADJUSTMENT pin currentChange in ADJUSTMENT pin currentTemperature stabilityLong-term stabilityIOUT = 10 mA to 800 mA, VIN − VOUT = 1.4 V to 10 VTJ = full range1000 hrs, No load, TA = 125°Cf = 10 Hz to 100 kHzTEST CONDITIONS†MINTYP800.20.50.3MAX12010UNITµAµA%%Output noise voltage (% of VOUT)0.003%†All characteristics are measured with a 10-µF capacitor across the input and a 10-µF capacitor across the output. Pulse testing techniques areused to maintain the junction temperature as close to the ambient temperature as possible.POST OFFICE BOX 655303 DALLAS, TEXAS 75265•9元器件交易网www.cecb2b.comSLVS561A − DECEMBER 2004 – REVISED MARCH 2005TLV1117ADJUSTABLE AND FIXED LOWĆDROPOUT VOLTAGE REGULATORSTYPICAL CHARACTERISTICS(GRAPHS PREVIEW)Figure 1. Short-Circuit Current vs (VIN − VOUT)Figure 2. Load Regulation vs TemperatureFigure 3. Ripple Rejection vs Frequency (ADJ Version)Figure 4. Ripple Rejection vs Current (ADJ Version)Figure 5. Temperature StabilityFigure 6. ADJ Pin Current vs TemperatureFigure 7. TLV1117-25 Load Transient ResponseFigure 8. TLV1117-25 Line Transient ResponseFigure 9. TLV1117-33 Load Transient ResponseFigure 10. TLV1117-33 Line Transient Response10POST OFFICE BOX 655303 DALLAS, TEXAS 75265•元器件交易网www.cecb2b.comTLV1117ADJUSTABLE AND FIXED LOWĆDROPOUT VOLTAGE REGULATORSSLVS561A − DECEMBER 2004 – REVISED MARCH 2005APPLICATION INFORMATION1N4002 (See Note D)TLV1117 − ADJVIINPUTOUTPUTVREFR1100 µF(see Note A)CADJ(see Note B)R2VOADJ/GND10 µF(see Note C)IADJVOUT is calculated as:VOUT+VREF1)R2)(IADJ R2)R1ǒǓBecause IADJ typically is 55 µA, it is negligible in most applications.NOTES:A.Output capacitor selection is critical for regulator stability. The recommended minimum is 10-µF tantalum or 50-µF aluminumelectrolytic, with either one having an ESR between 0.3 Ω and 22 Ω. Larger COUT values benefit the regulator by improvingtransient response and loop stability.1B.CADJ can be used to improve ripple rejection. Ensure that the impedance of CADJ is < R1 toXCADJ+C2pfrippleADJprevent the ripple from being amplified. If CADJ is used, then a larger COUT isrequired (22-µF tantalum or 150-µF aluminum electrolytic).C.CIN is recommended if TLV1117 is not located near the power-supply filter.D.An external diode is recommended to protect the regulator if the input instantaneously is shorted to GND.ǒǓFigure 11. Basic Adjustable RegulatorPOST OFFICE BOX 655303 DALLAS, TEXAS 75265•11元器件交易网www.cecb2b.com
PACKAGEOPTIONADDENDUM
www.ti.com
30-Mar-2005
PACKAGINGINFORMATION
OrderableDeviceTLV1117-15CDCYTLV1117-15CDCYRTLV1117-15CKCSTLV1117-15IDCYTLV1117-15IDCYRTLV1117-15IKCSTLV1117-18CDCYTLV1117-18CDCYRTLV1117-18CKCSTLV1117-18IDCYTLV1117-18IDCYRTLV1117-18IKCSTLV1117-25CKTPRTLV1117-33CDCYTLV1117-33CDCYRTLV1117-33CKCTLV1117-33CKCSTLV1117-33CKTTTLV1117-33CKTTRTLV1117-33DCYTLV1117-33IKCSTLV1117-50CDCYTLV1117-50CKCSTLV1117-50CKTERTLV1117-50CKTPRTLV1117-50CKTTTLV1117-50CKTTRTLV1117-50DCYRTLV1117CDCYTLV1117CDCYRTLV1117CKCTLV1117CKCSTLV1117CKTERTLV1117CKTPRTLV1117IDCYTLV1117IDCYRTLV1117IKCSTLV1117IKTERTLV1117IKTPR
Status(1)PREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWPREVIEWACTIVEACTIVEPREVIEWACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVEACTIVE
PackageTypeSOT-223SOT-223TO-220SOT-223SOT-223TO-220SOT-223SOT-223TO-220SOT-223SOT-223TO-220PFMSOT-223SOT-223TO-220TO-220DDPAK/TO-263DDPAK/TO-263SOT-223TO-220SOT-223TO-220PFMPFMDDPAK/TO-263DDPAK/TO-263SOT-223SOT-223SOT-223TO-220TO-220PFMPFMSOT-223SOT-223TO-220PFMPFM
PackageDrawingDCYDCYKCSDCYDCYKCSDCYDCYKCSDCYDCYKCSKTPDCYDCYKCKCSKTTKTTDCYKCSDCYKCSKTEKTPKTTKTTDCYDCYDCYKCKCSKTEKTPDCYDCYKCSKTEKTP
PinsPackageEcoPlan(2)
Qty443443443443244333343433233444333244332
250080250050502000300080250050200030008025005080250050802500508025005030008025005050501000805080502000300050
TBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBDTBD
Lead/BallFinish
CallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICUCUCallTICallTICallTICallTICUCUCallTICallTICallTI
MSLPeakTemp(3)CallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTICallTI
Level-2-235C-1YEARLevel-2-235C-1YEARCallTI
Level-NC-NC-NCLevel-1-220C-UNLIMLevel-1-220C-UNLIMLevel-2-235C-1YEARLevel-2-235C-1YEARLevel-NC-NC-NCLevel-1-220C-UNLIMLevel-1-220C-UNLIM
Addendum-Page1
元器件交易网www.cecb2b.com
PACKAGEOPTIONADDENDUM
www.ti.com
30-Mar-2005
(1)
Themarketingstatusvaluesaredefinedasfollows:ACTIVE:Productdevicerecommendedfornewdesigns.
LIFEBUY:TIhasannouncedthatthedevicewillbediscontinued,andalifetime-buyperiodisineffect.
NRND:Notrecommendedfornewdesigns.Deviceisinproductiontosupportexistingcustomers,butTIdoesnotrecommendusingthispartinanewdesign.
PREVIEW:Devicehasbeenannouncedbutisnotinproduction.Samplesmayormaynotbeavailable.OBSOLETE:TIhasdiscontinuedtheproductionofthedevice.
(2)
EcoPlan-Theplannedeco-friendlyclassification:Pb-Free(RoHS)orGreen(RoHS&noSb/Br)-pleasecheckhttp://www.ti.com/productcontentforthelatestavailabilityinformationandadditionalproductcontentdetails.TBD:ThePb-Free/Greenconversionplanhasnotbeendefined.
Pb-Free(RoHS):TI'sterms\"Lead-Free\"or\"Pb-Free\"meansemiconductorproductsthatarecompatiblewiththecurrentRoHSrequirementsforall6substances,includingtherequirementthatleadnotexceed0.1%byweightinhomogeneousmaterials.Wheredesignedtobesolderedathightemperatures,TIPb-Freeproductsaresuitableforuseinspecifiedlead-freeprocesses.
Green(RoHS&noSb/Br):TIdefines\"Green\"tomeanPb-Free(RoHScompatible),andfreeofBromine(Br)andAntimony(Sb)basedflameretardants(BrorSbdonotexceed0.1%byweightinhomogeneousmaterial)
(3)
MSL,PeakTemp.--TheMoistureSensitivityLevelratingaccordingtotheJEDECindustrystandardclassifications,andpeaksoldertemperature.
ImportantInformationandDisclaimer:TheinformationprovidedonthispagerepresentsTI'sknowledgeandbeliefasofthedatethatitisprovided.TIbasesitsknowledgeandbeliefoninformationprovidedbythirdparties,andmakesnorepresentationorwarrantyastotheaccuracyofsuchinformation.Effortsareunderwaytobetterintegrateinformationfromthirdparties.TIhastakenandcontinuestotakereasonablestepstoproviderepresentativeandaccurateinformationbutmaynothaveconducteddestructivetestingorchemicalanalysisonincomingmaterialsandchemicals.TIandTIsuppliersconsidercertaininformationtobeproprietary,andthusCASnumbersandotherlimitedinformationmaynotbeavailableforrelease.
InnoeventshallTI'sliabilityarisingoutofsuchinformationexceedthetotalpurchasepriceoftheTIpart(s)atissueinthisdocumentsoldbyTItoCustomeronanannualbasis.
Addendum-Page2
元器件交易网www.cecb2b.comMECHANICAL DATAMPDS094A – APRIL 2001 – REVISED JUNE 2002DCY (R-PDSO-G4)PLASTIC SMALL-OUTLINE6,70 (0.264)6,30 (0.248)3,10 (0.122)2,90 (0.114)0,10 (0.004)M47,30 (0.287)6,70 (0.264)3,70 (0.146)3,30 (0.130)Gauge Plane12,30 (0.091)4,60 (0.181)230,84 (0.033)0,66 (0.026)0,10 (0.004)M0°–10°0,25 (0.010)0,75 (0.030) MIN1,80 (0.071) MAX1,70 (0.067)1,50 (0.059)0,35 (0.014)0,23 (0.009)Seating Plane0,10 (0.0040)0,02 (0.0008)0,08 (0.003)4202506/B 06/2002NOTES:A.B.C.D.All linear dimensions are in millimeters (inches).This drawing is subject to change without notice.Body dimensions do not include mold flash or protrusion.Falls within JEDEC TO-261 Variation AA.POST OFFICE BOX 655303 DALLAS, TEXAS 75265•元器件交易网www.cecb2b.com MPFM001E – OCTOBER 1994 – REVISED JANUARY 2001 MECHANICAL DATA KTE (R-PSFM-G3) 0.375 (9,52)0.365 (9,27)0.360 (9,14)0.350 (8,89)0.220 (5,59)NOMPowerFLEX™ PLASTIC FLANGE-MOUNT0.080 (2,03)0.070 (1,78)0.050 (1,27)0.040 (1,02)0.010 (0,25) NOM0.295 (7,49)NOM0.420 (10,67)0.410 (10,41)0.360 (9,14)0.350 (8,89)0.320 (8,13)0.310 (7,87)Thermal Tab(See Note C)130.025 (0,63)0.031 (0,79) Seating Plane0.004 (0,10)0.005 (0,13)0.001 (0,03)0.100 (2,54)0.200 (5,08)0.010 (0,25)M0.010 (0,25)NOM Gage Plane0.041 (1,04)0.031 (0,79)3°–6°0.010 (0,25)4073375/F 12/00NOTES:A.B.C.D.E.All linear dimensions are in inches (millimeters).This drawing is subject to change without notice.The center lead is in electrical contact with the thermal tab.Dimensions do not include mold protrusions, not to exceed 0.006 (0,15).Falls within JEDEC MO-169PowerFLEX is a trademark of Texas Instruments.POST OFFICE BOX 655303 DALLAS, TEXAS 75265•1元器件交易网www.cecb2b.com MPSF001F – JANUARY 1996 – REVISED JANUARY 2002 MECHANICAL DATA KTP (R-PSFM-G2) PowerFLEX PLASTIC FLANGE-MOUNT PACKAGE0.243 (6,17)0.233 (5,91)0.228 (5,79)0.218 (5,54)0.130 (3,30) NOM0.080 (2,03)0.070 (1,78)0.050 (1,27)0.040 (1,02)0.010 (0,25) NOM0.215 (5,46)NOM0.381 (9,68)0.371 (9,42)0.100 (2,54)0.090 (2,29)0.247 (6,27)0.237 (6,02)0.287 (7,29)0.277 (7,03)Thermal Tab(See Note C)0.032 (0,81) MAXSeating Plane0.004 (0,10)0.031 (0,79)0.025 (0,63)0.010 (0,25)M0.005 (0,13)0.001 (0,02)0.090 (2,29)0.180 (4,57)0.010 (0,25) NOMGage Plane0.047 (1,19)0.037 (0,94)0.010 (0,25)2°–ā6°4073388/M 01/02NOTES:A.B.C.D.E.All linear dimensions are in inches (millimeters).This drawing is subject to change without notice.The center lead is in electrical contact with the thermal tab.Dimensions do not include mold protrusions, not to exceed 0.006 (0,15).Falls within JEDEC TO-252 variation AC.PowerFLEX is a trademark of Texas Instruments.POST OFFICE BOX 655303 DALLAS, TEXAS 75265•1元器件交易网www.cecb2b.com
元器件交易网www.cecb2b.com
元器件交易网www.cecb2b.com
元器件交易网www.cecb2b.com
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,enhancements, improvements, and other changes to its products and services at any time and to discontinueany product or service without notice. Customers should obtain the latest relevant information before placingorders and should verify that such information is current and complete. All products are sold subject to TI’s termsand conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale inaccordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TIdeems necessary to support this warranty. Except where mandated by government requirements, testing of allparameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible fortheir products and applications using TI components. To minimize the risks associated with customer productsand applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or processin which TI products or services are used. Information published by TI regarding third-party products or servicesdoes not constitute a license from TI to use such products or services or a warranty or endorsement thereof.Use of such information may require a license from a third party under the patents or other intellectual propertyof the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is withoutalteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproductionof this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable forsuch altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for thatproduct or service voids all express and any implied warranties for the associated TI product or service andis an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and applicationsolutions:ProductsAmplifiersData ConvertersDSPInterfaceLogicPower MgmtMicrocontrollers
amplifier.ti.comdataconverter.ti.comdsp.ti.cominterface.ti.comlogic.ti.compower.ti.commicrocontroller.ti.com
ApplicationsAudioAutomotiveBroadbandDigital ControlMilitary
Optical NetworkingSecurityTelephonyVideo & ImagingWireless
Mailing Address:
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright 2005, Texas Instruments Incorporated
www.ti.com/audiowww.ti.com/automotivewww.ti.com/broadbandwww.ti.com/digitalcontrolwww.ti.com/militarywww.ti.com/opticalnetworkwww.ti.com/securitywww.ti.com/telephonywww.ti.com/videowww.ti.com/wireless